User Manual

figure 18: Resistance Measurement
6.4.2 Making a Diode Measurement
To make a measurement on the diode, do the following:
1. Press the R key and R appear at the top of the screen.
2. Press AUTO SET key till the following is displayed on the screen .
3. Insert the black lead into the COM banana jack input and the red lead into the V/Ω banana jack input.
4. Connect the red and black leads to the resistor and the diode resistor readings are displayed on the
screen in V.
Now, you can see a screen that looks like the following figure 19.
figure 19: Diode Measurement
-73-