User Manual

5.4 Navigating a Menu
The following example shows how to use the tool’s menus to select a function, as shown in the following
figure.
1. Press the MENU key to display the Function Menu on the right of the screen and the corresponding
optional settings on the bottom. Press MENU again will hide the Function Menu.
2. Press the MENU ▲ or MENU ▼ key to select different function menus.
3. Choose one key from F1 to F5 and press it to change function setting.
See the following figure 5:
figure 5: the Tool’s Menus
5.5 Manually Setting the Vertical System, Horizontal System and Trigger Position
With the combination application of the four keys OSC ◄, OSC ►, OSC ▲ and OSC ▼, the users can make
the following settings circularly by pressing OSC OPTION. The settings include: Voltage Unit Scale of the
Channel; Primary Time base (TIME BASE), zero point position of channel, trigger horizontal position (TIME)
and trigger level position (TRIG).
The following example shows how to use OSC OPTION key to make a setting.
1. Press once the OSC OPTION key; the following is displayed at the bottom left side of the screen, as
shown in the figure below.
◄/► – Time Base
▲/▼ – Volts/Div
-61-