User Manual

5.Using the Scope
5.1 About this Chapter
This chapter provides a step-by-step introduction to the scope functions. The introduction does not cover all of
the capabilities of the scope functions but gives basic examples to show how to use the menus and perform
basic operations.
5.2 Power-Up the Oscilloscope
Connect oscilloscope to AC power via a power adapter as shown in Figure 1. (The oscilloscope may still work
with built-in Li-ion battery even without AC power supply)
Turn the oscilloscope on by pressing down the power on/off key
.
The instrument then performs self checking after power on. A greeting window and a sentence “press any key
to continue……” will display on the screen when the system finishes self checking.
The users can press any key to enter the measuring function.
The oscilloscope is powered up in its last setup configuration.
5.3 Oscilloscope Operation Window
See the following figure 4:
figure 4: Oscilloscope Operation Window
Description:
1. Battery electric quantity indicating symbols, including
, , and .
-59-