User Manual
3.3. Make a Check on Accessories
The accessory list has been described in the picture of Digital Oscilloscope Parts of this manual. You can
make a check and find whether there is any accessory loss with reference to the Appendix. In case of any
accessory loss or damage, consult the distributor responsible for such a business.
3.4. Make a Check on the Complete Instrument
If the instrument is damaged in its appearance or it fails in normal operation or performance test, consult the
distributor responsible for such a business. If the instrument is damaged due to transportation, keep the
packing in a proper place and consult the transportation department and the distributor responsible for such
business for providing an instrument replacement or maintenance.
4. Input Connections
4.1. Input Connectins
figure 2
Description:
1. The power adapter is supplied for AC power supply and battery recharging.
2. Multimeter test lead.
3. Multimeter input jacks, including three circular banana jacks and two square jacks.
The three circular jacks are used for voltage, current and resistance inputs, while the two square
jacks are used for capacitance inputs.
4. Oscilloscope probe.
5. Oscilloscope channel input.
6. The output terminal of 1KHz/5V square-wave test signal.
-56-