User Manual

figure 49: Window Setting
figure 50: Window Extension
7.14 Data Transmission
For the operation of data transmission, please execute the following steps:
i. Press MENU key, display the function menu on the right side of the screen.
ii. Press MENU ▲ or MENU ▼ key to select display setting mode, display four options at the
bottom.
iii. Press F4 key, and select the Bitmap or Vectors for data transmission.
iv. Use a data line to connect the oscilloscope and the PC .
v. Open the DS_WAVE software that had been installed completely.
6. Setting the parameter under the use’s manual, and then starts data transmission.
-100-