User Manual

figure 48: System State
7.13 Setting of Time Base Mode
The time base mode menu is explained as the following table.
Function menu Setting Explanation
TimeBase Main Horizontal main time base is used to wave display.
Window Zone Use two cursors to define a window area.
Window Expand the defined window to full-screen display.
For the operation of window extension, please execute the following steps:
i. Press MENU key, display the function menu on the right side of the screen.
ii. Press MENU ▲ or MENU ▼ key to select TIME BASE, display three options at the bottom.
iii. Press F2 key to select window setting.
c) Press OSC OPTION key, pop up TIME BASE, at this time, then press OSC ◄ and OSC ► key to
adjust the time base window area defined by two cursors, the window size will vary.
d) Press OSC OPTION key and call TIME, at this time, press OSC ◄ and OSC ► to adjust the window
position defined by two cursors, the window position is the time difference of the window center to
main time base’s horizontal pointer.
e) Press F3 key, select window extension, the defined window extends into the full-screen display.
The screen that looks like the following figure 49, 50 will be displayed.
-99-