User Manual

Now, you can see a screen that looks like the following Figure.
Figure 25: DC Voltage Measurement
6.1.6. Measuring AC Voltage
To measure the AC voltage, do the following:
1. Press the V key and DCV appears at the top of the screen.
2. Press the SET key and ACV appears at the top of the screen.
3. Insert the black lead into the COM banana jack input and the red lead into the V/Ω banana jack input.
4. Connect the red and black leads to the measured points and the AC voltage values of measured points
will be displayed on the screen.
Look at the display; you can see a screen that looks like the following Figure.
Figure 26: AC Voltage
6.1.7. Measuring DC Current
To measure a DC current which is less than 400 mA , do the following:
1. Press the A key and DCA appears at the top of the screen. The unit on the main reading screen is mA.
mA and 10A will display on the right bottom of screen, press F4 or F5 to switch the measurement
between mA and 10A. 400mA is acquiescently.
2. Insert the black lead into the COM banana jack input and the red lead into the mA banana jack input.
3. Connect the red and black leads to the measured points and the DC current values of measured points
will be displayed on the screen.
-83-