User Manual

5.17. Use USB mass storage device to save waveform data

Connect the USB mass storage device with the included adapter cable (mini USB to USB port) and connect it

to the device. A message (USB Device connected) appears in the display. Set in Oscilloscope-Menu "Display"

under "carry" whether an image file (bitmap) or a data file (Vector) should be stored by pressing COPY. Press

COPY during an oscilloscope or multimeter measurement to make a screenshot (. Bmp) or save a

measurement file (.bin) to the USB device. After saving, a message appears (USB save successfully) and the

file is stored. Open the vector files (.bin) with the included PC software or use the image file (.bmp) directly.

Screenshot Oscilloscope Screenshot Multimeter

Figure 19

6. Using the Multimeter

Figure 20: Multimeter Operation Window

-79-

10.

11.

12.