User Manual

Storage menu list:

Setting

Instruction

Start frame

1-3000

Set first frame to be saved.

End frame

1-3000

Set last frame to be saved.

Direction

Increase

Decrease

The value increases from the set start frame to the end frame

The value decreases from the set start frame to the end frame

To next menu

Save

Save recorded waveform to internal memory location.

Load

Recall recorded waveform from internal memory location.

Back to previous menu.

Record the waveform as follows:

1. Press the MENU key and the function menu appears at the right of the screen.

2. Press the MENU ▲ or MENU ▼ key to select Record and five options are displayed at the bottom of the

screen.

3. Press the F1 key to select the Record mode.

4. Press F2 and set the end frame at 300 (select the direction as Increase or Decrease in the second menu

before step 4).

5. Press F4 and set the time interval to 1.00ms.

6. Press F5 to enter into the second menu.

7. Press F1 and select Off to stop refreshing waveforms.

8. Press F5 to back up to the first menu.

9. Press F3 and select Play to operate.

Shown as the following Figures:

Figure 52: the first page of the record

-108-