User Manual

Record menu list:
Menu
Setting
Instruction
Mode
Record
Playback
Storage
Off
Select record mode.
Select playback mode.
Select storage mode.
Turn off all recorder functions.
End frame
1-3000
Set number of record frames.
Operate
Play
Stop
Press to start recording.
Press to stop recording.
Interval
1ms~1000s
Set time interval between record frames.
To next menu
Refreshed
On
Off
The waveforms are in the state of refreshing when recording.
The waveforms stop refreshing when recording.
Direction
Increase
Decrease
The value increases from that of end frame to time interval.
The value decreases from that of end frame to time interval.
Back to previous menu.
Note:
Both the waveforms are recorded at record mode. If one channel is off when recording, the channel data is not
available at Playback mode.
Playback: Playback the recorded waveforms.
Playback menu list:
Menu
Setting
Instruction
Play mode
Loop
Single
Set repeat play mode.
Set single time play mode.
Operate
Play
Stop
Press to start playback.
Press to stop playing.
Interval
1ms-20s
Set up interval value between frames.
To next menu
Start frame
1-3000
Set start frame.
Cur frame
1-3000
Select current frame to be played.
End frame
1-3000
Set End frame.
Direction
Increase
Decrease
The value increases at the mode of setting start frame, cur frame
and end frame
The value decreases at the mode of setting start frame, cur frame
and end frame
Back to previous menu.
Note:
The Run/Stop button can also replay or continue the waveform display.
Storage: Store recorded waveforms in non-volatile memory according to the setup frames.
-107-