Datasheet

3.9.2019 PeakTech® 1115 - PeakTech® - Convincing Top Technology
https://www.peaktech.de/productdetail/kategorie/erdungsmesser/produkt/p-1115.html 1/2
BACK
PeakTech_1115.pdf (352.4 kB)
MANUAL
1115_L.jpg (585.5 kB)
1115_R.jpg (442.4 kB)
PICTURE
PeakTech
Prüf- und Messtechnik GmbH
Gerstenstieg 4
DE 22926 Ahrensburg
Phone: [phone]
Fax: [phone]
Products Ground Resistance Meters & Ohm Meters Earth Resistance Tester PeakTech® 1115
PeakTech
®
1115 PROD-ID: P 1115
Digital earth resistance tester, ~ 0 - 2000 Ω ~ VDE 0413
A Rugged sealed digital earth tester is built with all the protection you
need for outdoor use. The instrument is suitable for the testing of single
earth electrodes such as lightning conductors and other small earthing
systems according to VDE 0413. The resistance of conductors such as
continuity and conduit coupling joints can also be measured. Two-
terminal operation measurement, which reduces the accuracy, can also
be done by shorting P and C terminals. It has an advanced circuit design
that permits the instrument to operate with the minimum influence from
earth voltage and earth resistance of the auxiliary spikes. The
calibration of the instrument is performed with the included test leads.
The test frequency of 820 Hz has been chosen to avoid stray currents at
power frequencies and their harmonics and with a built-in filter to
reject unwanted signals.
3½ digit LCD Display (max.2000)
Low BATT and overrange indication; Data hold
Safety: EN 61010-1; CAT III 300 V
Accessories: Test leads red 15 m, yellow 10 m, green 5 m, earth
spikes, batteries and manual
Measures down 0,01 Ω
Earth ranges 20/200/2000 Ω ± 2 % + 2 dgt.
Test Current 2 mArms
Voltage Range 0-200 V AC, 50/60 Hz ± 3 % + 2 dgt.
Resistance Display Indicates if resistance of auxiliary spikes resistance is within range
Storage temperature -5°C - +55°C
Operation temperature 0°C - +40°C
Operation Voltage 8 x 1,5 V Batteries (UM3, AA)
Dimensions (WxHxD) 250 x 190 x 120 mm
Weight 1,5 kg
EAN-13 4250569400148