User Manual

- 72 -
Sine signal
The parameters of the sine signal in the right menu are: Frequency/Period, Amplitude/High Level,
Offset/Low Level.
Frequency settings
Set the Frequency in the right menu (if Frequency is not displayed, select Period and press this button
again to switch back to Frequency).
To set the parameters in the right-hand menu, proceed as follows:
There are three ways to change the parameters:
1. M-rotary knob: Turn the M-rotary knob to change the value of the current cursor position. Press the ←→
arrow keys under the M knob to move the cursor and highlight the desired frequency setting location in
white.
2. Input field: Press the M rotary knob and a numeric input field appears for direct input of the frequency
via the M rotary knob or touch screen:
3. Touchscreen: Use the touchscreen fields that appear next to the frequency value: