User Manual

- 57 -
The Record menu (external memory) is displayed as follows:
Menu
Setting
Description
Fashion
OFF
Record
Closes shaft form receptacle
Sets recording menu
Record mode
FrameSet
End Frame
Turn the M-rotary knob to set the number of the end
recording frame (1-1000).
Interval
Turn the M-rotary knob to set the interval of playback (1ms-
1000s)
Infinity
Recording until the storage medium is full
Refresh
ON
OFF
Renew waveform during recording
Stop renewal
Operate
Play
Stop
Start recording
Stop recording
Hint:
Both waveforms (channel 1 & 2) are recorded. If you switch off a channel during recording, the channel is not
available during playback.
Use the waveform pick-up as described below:
1. Press the Save button.
2. Select Type in the lower picture menu, select Record with the M-rotary knob or touch screen.
3. Select Mode in the lower picture menu and OFF in the right menu.
4. In the bottom menu, select Storage as External.
5. Select Mode in the bottom menu and then Record in the right menu.
6. Then select FrameSet in the lower menu, set the EndFrame and the Interval in the right menu. If you
want to record the waveform without limit, select Infinity in the right menu. The end frame display is
shown as "-".
7. Press Refresh in the lower menu.
8. Then select Operate as Play.
Connect the external storage medium to your computer, open the PC software and load the
"wave_record_0.bin" file.
1. Select Communications Auto Player.
2. Transforming the waveforms from the unit (Transform recording...).
3. Add the transformed files.
4. Set Play Mode and Time Delay.
5. Click on the green play button to start playback: