User Manual

- 55 -
7. Check that the formatting has been carried out and that FAT32 is now displayed with a cluster size of
4096.
Cloning a waveform
To clone a waveform that lies between the cursors, please refer to Appendix C.
Saving and playing back recordings
Waveform recording can record the current waveform and save it as a movie. You can set the interval
between 1ms and 1000s, with a maximum of 1000 frames recorded. You can save the recording internally
or externally.
For internal storage, you can choose between 4 options: OFF, Record, Playback and Storage.
For external storage, you can choose between 2 options: OFF and Record.
Record: To record a waveform until the set interval reaches the end frame. The Record menu is displayed
as follows:
Menu
Setting
Description
Fashion
OFF
Record
Playback
Storage
Close Wave Record
Set Record Menu
Set Playback Menu
Set memory menu
Record Mode
Frame Set
End Frame
Turn the M-rotary knob to set the number of the
recording frames (1-1000).
Interval
Turn the M-rotary knob to set the interval of the
recording frames (1ms-1000s).
Refresh
ON
OFF
Renew waveform during recording
No renewal
Operate
Play
Stop
Start recording
Stop recording
Hint:
Both waveforms - channel1 and channel2- are recorded. If a channel is switched off during recording, this
channel is invalid during playback.
Playback: Playback plays back the recorded waveforms
The playback menu is displayed as follows: