Owner's Manual

Control Instructions
◆ APP Connection
1. The power station can be connected with the "Peak Fit" APP, which can
wirelessly control the power station, formulate training plans, view video
courses and other functions through the APP.
2. Open the “Peak Fit” APP, click on the device connection in the upper right
corner, select the power station, and search for the device. In the searched
device list, click on the corresponding device to connect.
◆ Wireless Switch
1. The wireless switch has the function of
controlling resistance start/stop. After pairing
with the device, click to control resistance
start/stop.
2. Long press the wireless switch to pair. If the blue light flashes 5 times, it means pairing is
successful. After pairing is successful, you can use it. In the pairing state, long press to
cancel the pairing. If the red light flashes 5 times, it means pairing is canceled.
3. Please prepare a button battery(CR2032) for the wireless switch's power supply. If the
battery is low, please change in time.
◆ Volume Adjustment
1. The volume of the power station needs to be adjusted in the “QiSense” app.
2. After connecting to the power station, enter the device management page and click
"Device Volume" to adjust.
★ Isokinetic Mode
·In the isokinetic mode, the resistance will change dynamically with the force you exert.
When the device feels that you are exerting a lot of force, it will increase the resistance to
ensure that the speed at which you pull is as close to a constant speed as possible, so that
muscles are fully stimulated throughout.
·We provide different speed levels of 0.1-1.0m/s to meet your different resistance and
speed requirements.
·When your pulling speed is lower than or equal to the set speed, the resistance is
relatively constant; when you pull faster than the set speed, the resistance will increase and
your movement speed will decrease.
CR2032 battery is required
109