User manual

Before turning on your computer, please make sure the
VGA card has been seated firmly and all cables are
connected.
Do NOT connect or disconnect the TV-out cable while
your TV or PC is turned on.
If applicable, please make sure you have plugged in the
6-pin auxiliary power cable for your graphics card.
Please proceed to the next section for Software Installation.
Section 2. Software Installation
Locate the driver CD and follow the steps below to install
the driver software for your new graphics card.
1.Close down all applications.
click on "Start"button on the taskbar "Run"then type
in D:\atisetup.exe and click "OK".
(Substitute D with the correct CD-ROM drive letter)
2.Insert the installation CD disc into your CD-ROM .
3.The CD should autorun. Note: if the CD does not autorun,
4.When the Welcome box appears, Click on the "Next"
button to go to the next step.
5.Click "YES" to agree to the License Agreement.
6.The “Select Components” dialog box appears. Choose “
Express” installation process.
7.Windows will ask you to restart the computer once the
Driver installation process has been completed.
Restart your computer to finish the installation process.
Congratulations! You can now enjoy your new PEAK
graphics card.
In addition to CD installation, you can also download the
latest ATI driver for your graphics card from
Follow the steps below to download and install a new
driver for your graphics accelerator card.
http://ati.amd.com/support/driver.html.
1.On the ATI driver downloading page, select your
Operating System Series Model
P. 5P. 4