User manual

Thank you for choosing this PEAK graphics accelerator card.
Combining powerful features and easy installation, you can
enjoy the latest in video technology. Powered
most powerful ever produced, you can finally
enjoy a lifelike high-definition multimedia experience on your
PC. We will guide you through the entire installation process.
Please read this guide carefully before installing your PEAK
graphics accelerator card. , feel free
to visit us at www.peakhardware.com/support .
by one of the
ATI Radeon GPUs
If you have any questions
> Installing your VGA Card
Please remove your old video card and its software
driver before installing the new PEAK ATI graphics
accelerator card. Follow the steps below to remove the
old video card driver:
1.Click on Start, and then select Control Panel.
2.Locate and select Add or Remove Programs.
3.Locate and select the old video card driver and click
on Change/Remove to uninstall the driver.
4.Close all applications, shut down Windows and turn
off the computer.
Section 1. Hardware Installation
CAUTION: This graphics accelerator card contains
delicate Integrated Circuit chips which are sensitive to
static electricity and other forms of physical damage.
Always use extreme caution when working around
electronic components. The manufacturer assumes no
liability for any damages, caused directly or indirectly,
by improper installation of any components by unautho-
rized service personnel. Consult a qualified computer
technician if you don't feel comfortable performing the
installation.
1.Unplug the computer and remove the cover.
2.Remove the current graphics card .
(Remember to electricity first by touching
an unpainted, metal surface of the computer chassis).
discharge any static
3.Locate the PCI-E/AGP slot and carefully insert the
New graphics accelerator card into the appropriate
slot until it is firmly seated. Secure it to the chassis
with the correct screw.
4.Attach the 6 pin auxiliary power cable to the power
supply if applicable.
6.Connect your monitor with the newly installed graphics
card. Plug the VGA or DVI display cable into the appropriate
connector. (See diagram)
5.Reconnect all cables and replace the cover.
You have now finished the Hardware Installation. Please
note the following:
P. 3P. 2