SDS

PEAK Original Equipment Technology Asian Vehicles Extended Life
BLUE 50/50 Prediluted Antifreeze and Coolant
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
01/01/2017
EN (English)
9/9
Full text of H-statements:
------
H302
Harmful if swallowed
------
H315
Causes skin irritation
------
H319
Causes serious eye irritation
------
H335
May cause respiratory irritation
------
H373
May cause damage to organs through prolonged or repeated
exposure
NFPA health hazard
:
1 - Exposure could cause irritation but only minor residual
injury even if no treatment is given.
NFPA fire hazard
:
1 - Must be preheated before ignition can occur.
NFPA reactivity
:
0 - Normally stable, even under fire exposure conditions,
and are not reactive with water.
HMIS III Rating
Health
:
2 Moderate Hazard - Temporary or minor injury may occur
Flammability
:
1 Slight Hazard - Materials that must be preheated before ignition will occur. Includes liquids,
solids and semi solids having a flash point above 200 ºF (93 ºC). (Class IIIB)
Physical
:
0 Minimal Hazard - Materials that are normally stable, even under fire conditions, and will NOT
react with water, polymerize, decompose, condense, or self-react. Non-Explosives.
Personal Protection
B - Safety glasses, Gloves
SDS GHS US (GHS HazCom 2012) OWI
Old World Industries, LLC makes no warranty, representation or guarantee as to the accuracy, sufficiency or completeness of the material set forth herein. It is the user's responsibility to determine the
safety, toxicity and suitability of his own use, handling and disposal of this product. Since actual use by others is beyond our control, no warranty, expressed or implied, is made by Old World Industries,
LLC as to the effects of such use, the results to be obtained or the safety and toxicity of this product, nor does Old World Industries, LLC assume liability arising out of the use by others of this product
referred to herein. The data in this SDS relates only to the specific material designated herein and does not relate to use in combination with any other material or in any process.