SDS

Blue Clear Guard Fuel Polisher and Water Dispersant
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
02/15/2017
EN (English)
8/12
2-butoxyethanol (ethylene glycol monobutyl ether) (111-76-2)
Surface tension
0.03 N/m (25 °C)
naphthalene (91-20-3)
Surface tension
0.03 N/m (100 °C)
12.5. Other adverse effects
Effect on global warming
:
No known effects from this product.
Other information
:
Avoid release to the environment.
SECTION 13: Disposal considerations
13.1. Waste treatment methods
Product/Packaging disposal recommendations
:
Dispose in a safe manner in accordance with local/national regulations. Dispose of
contents/container to appropriate waste disposal facility, in accordance with
local/regional/national/international regulations. Do not re-use empty containers.
Additional information
:
Handle empty containers with care because residual vapors are flammable.
Ecology - waste materials
:
Avoid release to the environment.
SECTION 14: Transport information
Department of Transportation (DOT)
In accordance with DOT
Transport document description
:
NA1993 Combustible liquid, n.o.s. (2-butoxyethanol, solvent naphtha (petroleum), heavy
arom.). Marine pollutant (Benzene, ethylenated, residues, distn. lights, solvent naphtha
(petroleum), heavy arom.) RQ (naphthalene), 3, III
UN-No.(DOT)
:
NA1993
Proper Shipping Name (DOT)
:
Combustible liquid, n.o.s. (2-butoxyethanol, solvent naphtha (petroleum), heavy arom.). Marine
pollutant (Benzene, ethylenated, residues, distn. lights, solvent naphtha (petroleum), heavy
arom.) RQ (naphthalene)
Class (DOT)
:
3 - Class 3 - Flammable and combustible liquid 49 CFR 173.120
Packing group (DOT)
:
III - Minor Danger
Marine pollutant
:
Yes (IMDG only)
DOT Packaging Non Bulk (49 CFR 173.xxx)
:
203
DOT Packaging Bulk (49 CFR 173.xxx)
:
241
DOT Symbols
:
D - Proper shipping name for domestic use only, or to and from Canada,G - Identifies PSN
requiring a technical name
DOT Special Provisions (49 CFR 172.102)
:
148 - Except for transportation by aircraft, when transported as a limited quantity or a consumer
commodity, the maximum net capacity specified in §173.150(b)(2) of this subchapter for inner
packagings may be increased to 5 L (1.3 gallons).
IB3 - Authorized IBCs: Metal (31A, 31B and 31N); Rigid plastics (31H1 and 31H2); Composite
(31HZ1 and 31HA2, 31HB2, 31HN2, 31HD2 and 31HH2). Additional Requirement: Only liquids
with a vapor pressure less than or equal to 110 kPa at 50 C (1.1 bar at 122 F), or 130 kPa at 55
C (1.3 bar at 131 F) are authorized, except for UN2672 (also see Special Provision IP8 in Table
2 for UN2672).
T1 - 1.5 178.274(d)(2) Normal............. 178.275(d)(2)
T4 - 2.65 178.274(d)(2) Normal............. 178.275(d)(3)
TP1 - The maximum degree of filling must not exceed the degree of filling determined by the
following: Degree of filling = 97 / (1 + a (tr - tf)) Where: tr is the maximum mean bulk
temperature during transport, and tf is the temperature in degrees celsius of the liquid during
filling.
DOT Packaging Exceptions (49 CFR 173.xxx)
:
150
DOT Quantity Limitations Passenger aircraft/rail
(49 CFR 173.27)
:
60 L