SDS

Blue Clear Guard Fuel Polisher and Water Dispersant
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
02/15/2017
EN (English)
3/12
Symptoms/injuries after skin contact
:
Causes skin irritation.
Symptoms/injuries after eye contact
:
Causes serious eye irritation.
Symptoms/injuries after ingestion
:
Swallowing a small quantity of this material will result in serious health hazard.
4.3. Indication of any immediate medical attention and special treatment needed
It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
SECTION 5: Firefighting measures
5.1. Extinguishing media
Suitable extinguishing media
:
Carbon dioxide. dry extinguishing powder. Foam. Water spray. Water fog.
Unsuitable extinguishing media
:
Do not use a heavy water stream.
5.2. Special hazards arising from the substance or mixture
Fire hazard
:
Combustible liquid. Thermal decomposition may produce : carbon dioxide (CO2), carbon
monoxide, Nitrogen oxides.
Explosion hazard
:
May form flammable/explosive vapor-air mixture.
5.3. Advice for firefighters
Firefighting instructions
:
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.
Protection during firefighting
:
Do not enter fire area without proper protective equipment, including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures
:
Remove ignition sources. Use special care to avoid static electric charges. No open flames. No
smoking. Use only non-sparking tools.
6.1.1. For non-emergency personnel
Emergency procedures
:
Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment
:
Equip cleanup crew with proper protection.
Emergency procedures
:
Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters.
6.3. Methods and material for containment and cleaning up
Methods for cleaning up
:
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect
spillage. Store away from other materials.
6.4. Reference to other sections
See Heading 8. Exposure controls and personal protection.
SECTION 7: Handling and storage
7.1. Precautions for safe handling
Additional hazards when processed
:
Handle empty containers with care because residual vapors are flammable. Keep away from
heat sources, open flames, sparks. - No smoking.
Precautions for safe handling
:
Wash hands and other exposed areas with mild soap and water before eating, drinking or
smoking and when leaving work. Provide good ventilation in process area to prevent formation
of vapor. No open flames. No smoking. Obtain special instructions before use. Do not handle
until all safety precautions have been read and understood. Avoid breathing mist, spray,
vapors. Use only outdoors or in a well-ventilated area. Do not reuse container.
Transport within user's premises: always transport in closed containers that are upright and
secure. Ensure that persons transporting the product know what to do in the event of an
accident or spillage.
Hygiene measures
:
Do not eat, drink or smoke when using this product. Wash affected areas thoroughly after
handling.
7.2. Conditions for safe storage, including any incompatibilities
Technical measures
:
Proper grounding procedures to avoid static electricity should be followed.
Storage conditions
:
Keep only in the original container in a cool, well ventilated place away from : Heat sources, hot
surfaces, open flames, sparks. Keep in fireproof place. Keep container tightly closed.
Incompatible products
:
Keep away from strong acids, strong bases and oxidizing agents.