User`s manual

25
 Enable L2TP pass through
on VPN conenction
Save
After completing the settings on this page, click Save to
save the settings.
Reset
Click Reset to restore to default values.
Ping
This screen allows you to perform a "Ping". The response messages that will appear below
can be useful in diagnosing network problems.
IP Address/ Host
name
Enter the IP address or domain name that you want to ping.
Run
Click to start pinging.
Reset
Click to clear the current IP address /Host name.
DoS Setting
A DoS (Denial of Service) attack does not attempt to steal data or damage your PCs, but
overloads your Internet connection so you cannot use it - the service is therefore unavailable.
If DoS function is enabled, DoS attacks will be detected and blocked. The default is unabled.
It is strongly recommended that this setting be left enabled.