User`s manual

Encryption: WEP

If WEP is selected, users will have to Set WEP keys either manually, or select to Use 802.1x

Authentication to make the RADIUS server to issue the WEP key dynamically.

SET WEP KEY

 Click the Set WEP Keys will prompt you a

window to set 64bit or 128bit Encryption.

 Select HEX if you are using hexadecimal

numbers (0-9, or A-F). Select ASCII if you are

using ASCII characters (case-sensitive).

 Ten hexadecimal digits or five ASCII

characters are needed if 64-bit WEP is used;

26 hexadecimal digits or 13 ASCII characters

are needed if 128-bit WEP is used.

Encryption: WPA (TKIP)

WPA (TKIP): If WPA is selected, users will have to select the Authentication modes between

Enterprise (RADIUS) and Personal (Pre-shared Key).

Pre-shared Key

Pre-Shared-Key serves as a password. Users may key in a 1

to 63 characters string to set the password or leave it blank, in

which the 802.1x Authentication will be activated. Make sure

the same password is used on client's end.

There are two formats for choice to set the Pre-shared key, i.e.

Passphrase and Hex. If Hex is selected, users will have to

enter a 64 characters string. For easier configuration, the

Passphrase (at least 8 characters) format is recommended.

Group Key Life Time

Enter the number of seconds that will elapse before the group

key change automatically. The default is 86400 seconds.

Enable Pre-

The two most im

ortant features be

ond WPA to become