Specification

R-25209_000 2021 07 06 RPT - Peak AQ PLUS - 2020 FRC 2020 FBC.docm Page 2
TABLE 1.1 2020 FBC AND 2020 FRC POOL REQUIREMENTS
RESULT CLAUSE DESCRIPTION COMMENT
Conform FBC 454.1.3.1.9 All pools surrounded by a
minimum 48 inch high fence or
other approved substantial barrier.
Aquatine PLUS top of
barrier is 48 inches
above grade.
Conform FBC 454.1.3.1.9
Fence gate is 48-inches high from
the ground or floor.
Aquatine PLUS top of
barrier is 48 inches
above grade.
Conform FBC 454.1.3.1.9 Fence gates are self-latching, with
a latch located a minimum of 54
inches from the bottom of the gate
or at least 3-inches below the top
of the gate on the pool side.
Aquatine PLUS gate is
equipped with self-
latching device 54 inches
above grade or floor.
Conform FBC 454.2.17
FRC R4501.17.1.1
Top of barrier not less than 48
inches above grade on the side
barrier that faces away from the
swimming pool.
Aquatine PLUS top of
barrier is 48 inches
above grade.
Conform FBC 454.2.17
FRC R4501.17.1.1
The maximum vertical clearance
between grade and the bottom of
the barrier shall be 2 inches
measured on the side of the
barrier which faces away from the
swimming pool.
Aquatine PLUS bottom of
barrier clearance is 2
inches maximum.
Conform FBC 454.2.17
FRC R4501.17.1.1
Maximum vertical clearance
between top of the pool and the
bottom of the barrier shall be 4
inches.
Aquatine PLUS bottom of
barrier clearance is 2
inches maximum.
Conform FBC 454.2.17.1.2
FRC R4501.17.1.2
Openings in any barrier shall not
allow passage of a 4-inch-diameter
sphere.
Aquatine PLUS maximum
sized openings are 4
inches.
Conform FBC 454.2.17.1.3
FRC R4501.17.1.3
Solid barriers which do not have
openings shall not contain
indentations or protrusions except
for normal construction tolerances
and tooled masonry joints.
Aquatine PLUS fence
barrier includes a
smooth glass surface.
N/A FBC 454.2.17.1.4
FRC R4501.17.1.4
Where the barrier is composed of
horizontal and vertical members
and the distance between the tops
of the horizontal members is less
than 45 inches, the horizontal
members shall be located on the
swimming pool side of the fence.
Spacing between vertical members
shall not exceed 1-3/4 inches in
width. Where there are decorative
cutouts within vertical members,
spacing within the cutouts shall
not exceed 1-3/4 inches in width.
Aquatine PLUS horizontal
members are spaced 45-
½ - inches apart.