Computer Accessories User Manual

PCAN-USB Hub – User Manual

The dialog box for selecting the CAN hardware and for

setting the CAN parameters appears.

Figure 10: Selection of the CAN specific hardware and parameters

2. From the list Baud rate select the transfer rate that is used

by all nodes on the CAN bus.

3. Under Message filter you can limit the range of CAN IDs to

be received, either for standard frames (11-bit IDs) or for

extended frames (29-bit IDs).

Finally confirm the settings in the dialog box with OK. The main

window of PCAN-View appears (see Figure 9).

ou can find further information about the use of PCAN-View in the

help which you can invoke in the program via the menu Help or the

F1 key.