Specifications

FCC Warning :
If the FCC identification number is not visible when the module is installed inside another device, then
the outside of the device into which the module is installed must also display a label referring to the
enclosed module. This exterior label can use wording such as the following: “Contains Transmitter
Module FCC ID: 2ATRY-A107”
when the module is installed inside another device, the user manual of this device must contain below
warning statements;
1.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two
conditions:
(1)
This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
2.
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may cause undesired
operation.
Caution
Modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
“CAUTION : Exposure to Radio Frequency Radiation.
Antenna shall be mounted in such a manner to minimize the potential for human contact during normal
operation.
The antenna should not be contacted during operation to avoid the possibility of exceeding the FCC
radio frequency exposure limit.
* Antenna Type: PCB Antenna
* Antenna Gain: -3.5 dBi
“This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.”