Operating Instructions

Table Of Contents

Tire pressure activator operating instructions

The main function of TPMS activator is to make the sensor send data

signal quickly, because the sensor is in sleep state for a long time,

the activator can wake up the sensor quickly, which is convenient for

users to learn and other operations.

The main components of the exciter are single chip microcomputer,

battery, 125kHz low frequency antenna and two No.7 batteries. There are

6 buttons and 1 red indicator light on the surface of the activator. Long

press any key to send 125kHz low frequency signal, which can wake up the

sensor within 20cm distance. When the sensor receives the low frequency

signal, it will immediately transmit the data signal. Users can read

sensor information through TPMS display.

PAGE 1
Tire pressure activator operating instructions The main function of TPMS activator is to make the sensor send data signal quickly, because the sensor is in sleep state for a long time, the activator can wake up the sensor quickly, which is convenient for users to learn and other operations. The main components of the exciter are single chip microcomputer, battery, 125kHz low frequency antenna and two No.7 batteries. There are 6 buttons and 1 red indicator light on the surface of the activator.
PAGE 2
FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.