User's Manual

Table Of Contents

(1)

(2)

(3)

AM/FM OPERATION

Make sure the DC power adaptor is connecting to the unit .

——Choose the function to AM/FM mode, Adjust the

“TUNING”(3)to choose the desired radio station .

——Fine tune by short adjust AM -/+10KHz, FM -/+100KHz.

——Choose the function to AM/FM mode,push “SCAN”(10)on

the rear panel. After scan,”M01-M20” will display on the right

corner of the LCD. Adjust the “TUNING”(3)to choose the radio

station. If you want cancel the scan, push the “SCAN”(10)again.

——”M01-M20” it means the unit can restore most 20pcs

stations.

TV WIRELESS CONNECTION

——Make sure the DC adaptor is connecting to unit.Adjust the

function knob to “STANDBY”,Long push “VOLUME”(1) until

“TR100-01”display on the LCD.

——Adjust the function knob to “TV”(2),Long push the “PAIR”(8)

5 seconds.the “PAIR” will display and blink on the LCD. In the

mean time ,you can open the TV wirless connect mode to

search the unit .”TR100-01”will display on the LCD. Then input

the code “0000”,Once the pair is successful ,”LINK”will display

on the LCD of TV and TR100. Then adjust the “TUNING”(3) to

choose the TV channel.

——The limited time of pairing is one minute ,If the pair is

unsuccessful. You can reset the “PAIR”(8) 5 seconds again.

Once the pairing is successful, You don’t to pair the TV any