User's Manual

Document Number: PD196-120 Rev 2
73
PROBLEM
CHECK
No Picture on Screen, No Sound from
Speakers.
• Make sure the TV set is powered – Power
indicator is Red.
• Turn on the TV using the “POWER” button.
No Picture, Sound OK.
• Check the Brightness setting of the TV.
• Internal LCD panel lamps may have failed.
• If a secondary source is selected, verify the
Video input signal is connected.
Picture OK, No Sound.
• Check the Volume settings.
• Verify the Sound has not been muted.
• Verify the pillow speaker is connected with
the pillow speaker volume wheel adjusted
for proper sound.
• If a secondary source is selected, verify the
audio input signal is connected.
No Sound from Internal TV Speakers.
• Verify TV speaker has not been disabled in
the “Internal Speaker Disable” setup menu.
• Verify the Sound has not been muted.
Picture is too Light.
• Verify correct color and contrast settings.
Picture is too Dark.
• Verify Brightness setting correct and not
too low.
• Internal LCD Panel lamps may have failed.
Remote Control does not work.
• Change the remote’s batteries.
• Verify the TV’s IR window is not flooded
with strong lights such as from fluorescent
lamps.
• For a Patient Remote, verify correct Bed
Code settings.
Picture is not sharp. Picture moves or jitters.
• The cable TV signal may be weak.
• Verify the coax cable is connected.
Picture has ghost images.
• The cable TV signal may be weak.
• The coax cable connection may be loose.
Stripes or Dots move through picture.
• Possible interference from nearby hospital
equipment.
• The cable TV signal may be weak.
T
roubleshootin
g