User's Manual

Document Number: PD196-120 Rev 2
65
Preparation
1. In DVD mode, press the SETUP button to open DVD setup menu.
2. Press the  button to select the Setup menu
3. Press the SETUP button again to exit the DVD setup menu.
General Setup Page
Press the SETUP button to enter the General Setup Page, as shown:
TV Display
Angle Mark
1. Within this menu, press the  button to
select an item.
2. Press the OK button to enter.
3. Press the button to return.
1. Press the  button to select TV Display.
2. Press the OK button to enter the setup.
3. Press the  button to select the desired
item.
4. Press the OK button again to confirm selection
and return to the previous menu.
Note: “Normal/Ps” and “Normal/Lb” are available
only when “HD Mode” is set to “Off”.
1. Press the  button to select Angle Mark.
2. Press the OK button to enter the setup.
3. Press the  button to select On or Off.
4. Press the OK button again to confirm selection
and return to the previous menu.
DVD System Setup