User's Manual

Document Number: PD196-120 Rev 2
60
Preparation
1. Install the DVD module into the TV as detailed in Page 19.
2. Connect the module to the power supply and press the POWER button to turn on the unit.
3. Use the TV/AV button on the TV or remote to select DVD mode.
4. Gently insert the disc, with the label side toward the front of the television, into the disc tray
slot.
5. The disc will be drawn into the unit and loaded automatically.
Warning: Use of poor quality discs could result in damage to the DVD module or television.
DVD Playback
Region Code
DVD players and discs are coded by region. These regional codes must match the played discs. If
the codes don’t match, the disc cannot be played. This player’s default code is region 1.
Play
After loading a DVD disc, disc menu will appear on the screen if the disc includes the menu. Press
the Play button to start playback.
Stop
During playback, press the ■Stop button once to stop playback and then press Play button to
resume. Press this button twice to stop playback completely.
Pause
During playback, press the Pause button once to pause the playback; press it repeatedly to start
step-by-step playback and press the Play button to resume normal playback.