User's Manual

Document Number: PD196-120 Rev 2

Download Firmware to TV

1. In the Cloning Main Menu, press the CH+/- or ▲/▼ direction buttons to select Download

Firmware to TV item. Then press the VOL- or ► direction button to enter the sub-menu.

2. Press the CH+/- or ▲/▼ direction buttons to select “Update ATMega16”, “Update ZR760” or

“Update Boot Sector”. Press the VOL- or ► direction button to select “0” for not upgrade and

“1” for upgrade.

3. After you select the desired item you want to upgrade, press the CH+/- or ▲/▼ direction

buttons to select “Upgrade” item and press the VOL- or ► direction button and a confirm menu

will appear.

4. Press the CH+ or ▲direction button to confirm and start to upgrade the selected item.

5. Press the ◄ direction button to return to the previous menu.

Notes:

 If you want to activate the item “Update Boot Sector”, the item “Update ZR760” must be set to

“1”.

 During upgrading, the power indicator will blinks. When the upgrade is over, the power indicator

will in red. If the upgrade is fail, the power indicator will be OFF.

 After “Update ZR760” is over, it is necessary to unplug and re-plug the TV to AC power.

 During the process of “Update Boot Sector”, the power cannot be cut off.

Information

1. In the Cloning Main Menu, press the CH+/- or ▲/▼ direction buttons to select Information item.

Then press the VOL- or ► direction button to check the type and version in TV and SD Card.

2. Press the ◄ direction button to return to the previous menu.

Clonin