User's Manual

Document Number: PD196-120 Rev 2
53
Inactive Power Off
The TV will automatically power off after a specific period of
viewer inactivity providing energy savings.
1. In the Features menu, press the CH+/- or ▲/▼
direction buttons to select Inactive Power Off(h:mm).
2. Press the VOL+/- or ◄/► direction buttons to
determine active time. Set to Disabled to disable this
feature.
3. Press the SETUP button to return to the previous menu.
NOTE: Auto Power On must be set to Disabled for this function to operate.
Bed A/B
The remote offers independent Bed A or Bed B selectable
codes and independent control of a single television in a
two television room.
1. In Features menu, press the CH +/- or ▲/▼ direction
button to select Bed A/B.
2. Press the VOL+/- or ◄/► direction button to select
remote control
A or B .
3.
Press the SETUP button to return to the preceding menu.
NOTE: The remote’s bed codes are set by press a paper clip or pencil tip end into the code hole
located above the “CODE” label on the remote.
Caption Text Modes
Teletext can be displayed in addition to Captions. Teletext is
not normally broadcast in the USA. Caption Text Modes
should be set to Disabled for televisions operated in the
USA.
1.
In Features menu, press the CH+/- or ▲/▼ direction
button to select Caption Text Modes.
2.
Press the VOL+/- or ◄/► direction button to select
Disabled or Enabled.
3.
Press the SETUP button to return to the preceding menu.
Features