User's Manual

Document Number: PD196-120 Rev 2
50
Power On Channel
Displays a fixed channel each time the TV is turned on. This feature is useful for hospitals that have
a Welcome Channel and wish to have it displayed upon initial use of the TV. The patient can then
tune to any other available channel.
1. From the Channels menu, press the CH+/- or ▲/▼ direction button to select the Power On
Channel. Then press the VOL+/- or ◄/► direction button to enter.
2. Press the CH+/- or ▲/▼ direction button to select the desired service level.
3. Press the VOL+/- or ◄/► direction buttons to scroll through the channels currently available in
the Service Level. Select either a dedicated channel or “Last” for the last channel viewed by the
patient.
4. Press the SETUP button to return to the previous menu.
Channel Lock
Locks the currently viewed channel and prevents patients
from tuning to any other channel. This feature is useful
when the TV is used for information display purposes.
1.
From the Channels menu, press the CH+/- or ▲/▼
direction
button to select the C hannel Lock.
2.
Press the VOL+/- or ◄/► direction button to Enable
or Disable the Channel Lock feature.
3.
Press the SETUP button to return to the previous
menu.
Channel Memory Override
Prevents patients for tuning to a channel that is not
memorized in the current Service Level memory.
1.
From the Channels menu, press the CH+/- or ▲/▼
direction
button to select the C hannel Memory
Override.
2.
Press the VOL+/- or ◄/► direction button to Enable
or Disable the Channel Memory Override feature.
DISABLED = Service Level Channels only.
ENABLED = All possible channels.
3.
Press the SETUP button to return to the previous menu.
Channel Setup