User's Manual

Document Number: PD196-120 Rev 2
43
Clear Service Level
Empties a service level of all programmed channels leaving it blank.
1. From the Channels menu, press the CH+/-
or ▲/▼ direction buttons to select Clear
Service Level.
2. A listing of service levels are shown with
the current programmed status.
3. Press the CH+/- or ▲/▼ direction buttons
to select the desired Service level.
4. Press the VOL+/- or ◄/► direction buttons
once. A Confirm Clear menu appears.
5. Press the CH + or ▲direction button to
confirm clearing of the selected Service
Level.
6. Press the CH - or▼ direction button to exit
without making any changes to the
selected Service Level.
7. Press the SETUP button to return to the
preceding menu.
Channel Setup