User's Manual

Document Number: PD196-120 Rev 2

The Add/Delete Channels menu provides access to both Analog and Digital Channels.

6. Press the VOL+/- or ◄/► direction buttons to select the Analog channel number. Then press

the CH+/- or ▲/▼ direction buttons to select Add/Delete Analog Channel. Use the VOL+/- or

◄/► direction buttons to select Added or Deleted.

7. Press the CH+/- or ▲/▼ direction buttons to select Enabled/Disabled Digital Channels menu.

Then press the VOL+/- or ◄/► direction buttons to enter. A status listing of the current

memorized channels is shown.

8. Select the channel to be changed using the CH+/- or ▲/▼ direction buttons. Use the VOL+/- or

◄/► direction buttons to change the status to Enabled or Disabled.

9. Press the SETUP button to return to the preceding menu.

Channel Setup