User's Manual

Document Number: PD196-120 Rev 2

Internal Speaker Enable

The speaker’s inside the TV’s cabinet can be turned on or off for either different TV Service Level or

Source modes. Note: Sound to an attached pillow speaker remains on at all times.

1. In the Sound menu, press CH+/- or ▲/▼ direction button to select the Internal Speaker Enable

menu item.

2. Press the CH+/- or ▲/▼ direction button to select the desired Sources.

3. Press the VOL+/- or ◄/► direction to select Disable or Enabled.

4. Press the SETUP button to return to the preceding menu.

HDMI Audio Port

Sound can be inputted to one of several other inputs when the TV is set to HDMI video.

1. In the Sound menu, press CH+/- or ▲/▼ direction button to select HDMI Audio Port.

2. Press the VOL+/- or ◄/► direction to select either HDMI, PC or Component inputs for audio

while using HDMI video.

3. Press the SETUP button to return to the preceding menu.

Channels

The TV offers three different programmable channel banks or Service Levels. Programming is only

accomplished using the handheld remote control.

Sound Control