User's Manual

Document Number: PD196-120 Rev 2

Bed A/B Selection

The remote offers independent Bed A or Bed B selectable codes and independent control of a

single television in a two television room.

Press the CODE button on the remote control to shift between Bed A and Bed B.

On Screen Menu Language Selection

You can adjust the language used in displaying the OSD on screen display.

1. Press the OK button on the remote control.

2. Press the CH+/- or ▲/▼ direction button to select the OSD language menu.

3. Press the VOL+/- or ◄/► direction button to select the desired language.

4. Press the SETUP button to exit the main menu.

Changing the Source Input

The TV can be switched to other display modes such as VCR, DVD, PC, or other externally

connected devices.

1. Press the TV/AV button to change to another source input.

NOTE: The desired source input must be enabled in the Source Setup menu.

Please see

“Source Setup” instructions elsewhere in this manual for details.

2. Alternatively, press ▲/ ▼ buttons until reaching the highest channel (or below to the lowest

channel). All activated sources will appear in the channel table above the highest channel and

is directly viewable.

NOTE: The “Channel to Other Sources” must be enabled in the FEATURES menu to allow top

of channel display of activated sources.

English

Francais

Espanol

Basic O

eration