User's Manual

Document Number: PD196-120 Rev 2

Turning the TV On and Off

1. Connect the AC power cord to wall AC Outlet. A front mounted indicator light will illuminate Red

indicating the TV has power.

2. Press the POWER button on the remote control, or the TV’s POWER button, or the pillow

speaker’s TV power button. The TV’s indicator light will illuminate Green indicating the TV is

turned ON. The TV’s screen display requires approximately 3 seconds to warm up and display

a picture.

3. Press the POWER button again to turn the TV off. A front mounted indicator light will illuminate

Red indicating the TV is off.

Channel Selection

You can select a channel number with the CH+/- or NUMBER buttons.

NOTE: Not all pillow speaker models support direct entry of channels.

Volume Adjustment

Press the VOL+/- button to adjust the sound level.

NOTE: Some pillow speakers contain only a volume wheel that may also require adjustment.

Last Channel

Press the LAST button on the remote control to view the last program you were watching.

NOTE: Some pillow speakers do not support last channel viewing.

Sound Mute Function

Press the MUTE button. The sound is switched off and the mute display appears.

To cancel mute mode, press the MUTE button again, or press VOL+ or VOL-.

NOTE: Some pillow speakers do not support the mute feature.

Sleep Timer

The sleep timer turns the TV off after activation of a preset time limit.

Press the SLEEP button on the remote repeatedly to select the number of minutes. The time limit

can range from 10 up to 120 minutes in value.

Basic O

eration