User's Manual

Document Number: PD196-120 Rev 2
29
PC IN
The TV can also be used as a computer monitor.
1. Connect the computer’s video cable to the VGA IN socket on the set.
2. Connect the computer’s audio cable to the AUDIO IN jack on the set.
3. Verify that PC-ANALOG is enabled in the “Source Setup” menu. Please see “Source Setup”
instructions elsewhere in this manual for details.
4. Press the TV/AV button repeatedly until PC-ANALOG appears in the lower right corner of the
screen indicating selection of PC-ANALOG input.
5. Switch on the computer. The computer’s screen should appear on the set.
Connections