User's Manual

Document Number: PD196-120 Rev 2
27
Pillow Speaker
The pillow speaker (pendant control) jack is located on the TV’s connector panel. Control of the TV
using an external wired pillow speaker is possible.
1. Select the appropriate brand of digital pillow speaker suing the recess slide switch next to the
PILLOW jack.
CZ for Zenith
©
CP for Philips
©
CR for RCA
©
OFF to disable the pillow speaker.
For analog style pillow speakers set the switch to either CZ, CP or CR.
NOTE: The TV is shipped from the factory with the switch in the OFF position.
CAUTION: Confirm pillow speaker type and set the side switch appropriately
BEFORE connecting the pillow speaker to the TV. Failure to follow this procedure
could result in damage to the pillow speaker and/or TV.
2. Connect the pillow speaker to the PILLOW jack.
3. Operate the pillow speaker and verify correct control.
Zenith is a trademark of the Zenith Electronics Corporation, All Rights Reserved.
Philips is a trademark of Koninklijke Philips N.V. All rights Reserved.
RCA is a trademark of the RCA Corporation. All Rights Reserved.
Connections