User's Manual

3. MTI
Connect to MTI device.
Note: CCI and MTI can not be connected to the
external public network, and can be used by the
technician only.
4. VGA IN
Connection to the video output jack on your PC.
Connect the audio cable from the PC to the AUDIO
IN of the set.
5. SD Card Slot
Firmware upgrading purpose.
6. HDMI Jacks
Connection for HDMI device.
7. COMPOSITE OUT
Connect the Video/Audio inputs of external
equipment to this input.
8. COAXIAL Jack
Provides a digital audio output signal for connection
to an external digital audio device.
9. Power Supply Cord
10. COMPOSITE/S-VIDEO IN
Connect the Video/S-VIDEO outputs of external
equipment to this input.
Connect the audio cable from the external equipment
or S-VIDEO VCR to the L & R IN of the set.
11. COMPONENT1 IN
Connect the COMPONENT audio/video output
sockets of the DVD to the COMPONENT audio/video
input sockets of the set.
12. COMPONENT2 IN
Connect the COMPONENT audio/video output
sockets of the DVD to the COMPONENT audio/video
input sockets of the set.
13. ANT TV/FM Jack
Connection to TV/FM antenna.
Front Panel
1. Color TFT screen
2. Speakers
3. Power Indicator
Illuminates in red when the TV is off.
Illuminates in green when the TV is switched on.
4. Remote Sensor
Accepts the IR signal of remote controller.
Page 5 of 11