User's Manual

Table Of Contents

Page 2 of 11

Clear View Communication Systems, Inc. claims proprietary right to the material disclosed in this user guide. This guide

is issued for user information only and may not be used to manufacture anything shown herein

. C

opyright 2009 by Clear

DISCLAIMER

The author and publisher have used their best efforts in preparing this guide. Clear View Communication Systems, Inc.

makes no representation or warranties with respect to the accuracy or completeness of the content of this guide and

specifically disclaim any implied warranties or merchantability or fitness for any particular purpose and shall in no event

be liable for any loss of profit or any other damages. The information contained herein is believed to be accurate, but is

not warranted, and is subject to change without notice or obligation.

TRADEMARKS

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

All other brand names and product names used in this guide are trademarks, registered trademarks, or trade names of

their respective holders. Clear View and Better Solutions Are Within Reach are registered trademarks of Clear View.

LOCATION GUIDELINES

The model CLEAR VIEW-LCD TV is intended for entertainment and educational purposes in a hospital, a nursing home,

medical-care center, or similar health-care facility in which installation is limited to a non-hazardous area in accordance

with the National Electrical Code, ANSI/NFPA 70. The CLEAR VIEW-CV26/32 designed for mounting to CLEAR VIEW

manufactured mounts. Installation of the TV on any other mount is not recommended.

WARNING: The TV’s VESA mounting holes are designed

for M4 and/or M6 metric screws only. Use of a non-CLEAR

VIEW approved mount or SAE hardware could result in a

condition where the TV could unexpectedly fall and cause

injury or death.

The CLEAR VIEW-CV26/32 mounts on the wall at the foot of a patient’s bed. Select a location that is near an AC wall

outlet and that does not expose the TV to bright room lights or sunlight, if possible. The LCD TV also requires connection

of both CATV cable signal and across-room wiring for the pillow speaker.

CABLE SYSTEM GROUNDING

The coax cable system connected to the CLEAR VIEW-CV26/32 should be grounded in accordance with the National

Electrical Code, ANSI/NFPA 70. The code provides guidelines for proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as

practical.