Operating Instructions

alarm is
turned on, the red light will flash once every three seconds when the equipment power is
lower than 10%.
Function set ：
1.
Connect the device to the USB port of the computer;
2. Run FootSwitch software;
3.
Click the Select function window;
4.
Select or enter the key value to be set;
5.
Click the "Save to key" button to complete the setting.
Modify bluetooth name:
You can modify the name of Bluetooth in
“Pairings
etting”, enter the character to be added in the input box of
key
” to complete the modification of Bluetooth name, as shown below:
Set the sleep time:Click
“Pairing Setting”
sleep time indicates how long the device will enter
www.pcsensor.com
Copyright ®2021 by Pcsensor
turned on, the red light will flash once every three seconds when the equipment power is
Connect the device to the USB port of the computer;
Click the Select function window;
Select or enter the key value to be set;
Click the "Save to key" button to complete the setting.
You can modify the name of Bluetooth in
Pairings
etting. Click
etting”, enter the character to be added in the input box of
device name, and click “Save to
” to complete the modification of Bluetooth name, as shown below:
“Pairing Setting”
to set the sleep time in the input box of sleep time. The
sleep time indicates how long the device will enter
the sleep state after no action (Pedal no action).
www.pcsensor.com
turned on, the red light will flash once every three seconds when the equipment power is
etting. Click
device name, and click “Save to
to set the sleep time in the input box of sleep time. The
the sleep state after no action (Pedal no action).