Operating Instructions

ManualsBrandsPCsensor ManualsElectronicsBluetooth Foot Switch

www.pcsensor.com

FS2016BT1_D Product Descritption

Product picture

Function description

FS2016BT1_D is a button bluetooth foot switch, keys can be customized to keyboard, mouse and

other functions, can be connected through Bluetooth or USB cable connection.Users can define keys

for keyboard function, mouse function, string printing function, multimedia function and macro

definition function through the supporting software.

1. Keyboard function: can be set to any key value or combination key (including F 13 to F 24

etc.), such as key value A or CTRL+A function.

2. Mouse function: can be set to left, middle, right of mouse button or scrolling wheel either in

horizontal or vertical direction.

3. String input: a maximum of 38 characters can be set, such as www.pcsensor.com.

4. Multimedia function: support multimedia function, such as the previous, the next, volume up,

volume down and so on.

5. Macro definition function: can define a series of keyboard and mouse action combination, for

example, set Ctrl+P delay 100ms after the return to realize automatic printing function.

Product parameters

1. Product Name：A one-key bluetooth foot switch

2. Product model：FS2016BT1_D

3. Bluetooth coverage radius：≥10m

4. Bluetooth version：Bluetooth 4.2

5. Power Supply Voltage：AAA(No.7)*2 battery

6. working current ：＜2mA

7. Switch service life：More than a million times

8. Connection method : Buetooth/USB

Summary of content (4 pages)

PAGE 1
www.pcsensor.com FS2016BT1_D Product Descritption Product picture Function description FS2016BT1_D is a button bluetooth foot switch, keys can be customized to keyboard, mouse and other functions, can be connected through Bluetooth or USB cable connection.Users can define keys for keyboard function, mouse function, string printing function, multimedia function and macro definition function through the supporting software. 1.
PAGE 2
www.pcsensor.com Bluetooth pairing The product is compatible with android, Windows8, Windows10, IOS and Mac OS systems. The blinking red and green light indicates that the device is in pairing mode mode,you you can connect the device with your mobile phone or computer. Blinking red and green: In pairing mode, users can search for the device through bluetooth enabled devices, such as computers and mobile phones, and then pair the device.
PAGE 3
www.pcsensor.com alarm is turned on, the red light will flash once every three seconds when the equipment power is lower than 10%. Function set ： 1. 2. 3. 4. 5. Connect the device to the USB port of the computer; Run FootSwitch software; Click the Select function window; Select or enter the key value to be set; Click the "Save to key" button to complete the setting. Modify bluetooth name:You can modify the name of Bluetooth in Pairingsetting. etting.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.