User Manual

Fritz Building Instruction December 2020
www.pcm.at 3
DATA
1. Kit – contents
Flying wing
Lever for controlling ailerons, 2 pc.
Parts for moving outer controls, 2 sets
Rods for controlling ailerons 2 pc.
Contacts 1 pair
Gap covers for aileron
Twisted servo cable
Carbon covers
Latex skin
Steel for switch (not in pic)
Building instruction (for download from our website)
2. What else do you need:
Runny CA (cyanacrylat, = super glue)
Electric equipment (plugs...)
Electronic equipment
Epoxy resin or UHU 300 endfest
Shrinking tube...
3. Electronic equipment
Servo ailerons:
- KST X08 V5 H
Accumulator:
- XCell - X350AAAH 350mA/h
- GP NIMH 40AAAM 400mA/h
-2S Lipo with 10mm thickness should also fit.
Receiver:
- for 2 wing servos, 2 antennas are recommended