User Manual

Fritz Building Instruction December 2020
www.pcm.at 11
Glue the frame to the latex foil
and cut it out. We delivered twice
as much latex as you need. So
leave a piece for changing.
Turn the frame with the foil so that
the latex is on the upper side and
glue it with tape into the
depression of the wing.
At the right picture you see the
gripping position for a hand start.
Covering gaps
Cover the gaps with the sealing
tape. Also cover the gap between
the two controls at the lower side
with the broad sealing tape.
Bungee hook
The bungee hook can be screwed
into the milled hole in the front of
the wing.