Tus neeg siv phau ntawv

English

1 Safety notes

Please read this manual carefully and completely before you use the device for the first time.

The device may only be used by qualified personnel and repaired by PCE Instruments

personnel. Damage or injuries caused by non-observance of the manual are excluded from our

liability and not covered by our warranty.

 The device must only be used as described in this instruction manual. If used

otherwise, this can cause dangerous situations for the user and damage to the meter.

 The instrument may only be used if the environmental conditions (temperature,

relative humidity, …) are within the ranges stated in the technical specifications. Do

not expose the device to extreme temperatures, direct sunlight, extreme humidity or

moisture.

 Do not expose the device to shocks or strong vibrations.

 The case should only be opened by qualified PCE Instruments personnel.

 Never use the instrument when your hands are wet.

 You must not make any technical changes to the device.

 The device must only be used with accessories from PCE Instruments or equivalent.

 Before each use, inspect the case for visible damage. If any damage is visible, do not

use the device.

 Do not use the instrument in explosive atmospheres.

 The measurement range as stated in the specifications must not be exceeded under

any circumstances.

 Wear safety equipment, such as goggles, gloves or breathing masks to protect

yourself against splashing liquids and escaping gases.

 Place the device on a flat, clean, non-slip and fire-proof surface.

 The set temperature has to be at least 25 °C lower than the flash point of the material

to be heated.

 Make sure that the flask is not filled too far, especially when working with inflammable

or corrosive liquids. The liquids might overboil and leak from the flask which might

cause damage to the equipment or to persons.

 Make sure that the flask is dry from the outside.

 Pathogenic materials should only be heated in closed vessels.

 Inspect the flasks for visible damage before heating. Do not heat up damaged flasks.

 Non-observance of the safety notes can cause damage to the device and injuries to

the user.

We do not assume liability for printing errors or any other mistakes in this manual.

We expressly point to our general guarantee terms which can be found in our general terms of

business.

If you have any questions please contact PCE Instruments. The contact details can be found at

the end of this manual.