Manual

© PCE Instruments
15
English
1 Safety notes
Please read this manual carefully and completely before you use the device for the first time. The
device may only be used by qualified personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and not
covered by our warranty.
• The device must only be used as described in this instruction manual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
• The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specifications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture.
• The case should only be opened by qualified PCE Instruments personnel.
• Never use the instrument when your hands are wet.
• You must not make any technical changes to the device.
• The appliance should only be cleaned with a damp cloth. Use only pH-neutral cleaner, no
abrasives or solvents.
• The device must only be used with accessories from PCE Instruments or equivalent.
• Before each use, inspect the case for visible damage. If any damage is visible, do not use
the device.
• Do not use the instrument in explosive atmospheres.
• ATTENTION: For impact tests, the maximum measurable value of the force gauge should
be twice as high as the applied impact load.
• When doing impact tests, wear a mask and protective gloves to avoid injuries.
• Do not use the test stand when it is bent or damaged. Dropping can cause injuries.
• This device only measures tensile and compressive forces. The test head must not be
bent or twisted.
• Overloading, excessive impact loads or applied forces other than tensile and compressive
forces can cause damage to the sensor.
• Do not press the keys with pointed objects.
• Keep the force gauge away from water, oil and other liquids.
• Store the meter in a cool, dry place without any occurrence of vibration.
• Wire the ports as described in this manual. Non-observance of the instructions can cause
circuit failure or problems with your computer.
• Make sure that the mains adaptor is securely connected to the power outlet as otherwise
short circuits and thus electric shocks and fire can occur.
• When the battery is fully charged, remove the mains adaptor immediately to avoid
overheating, fire or accidents.
• Non-observance of the safety notes can cause damage to the device and injuries to the
user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at the
end of this manual.