Manual

English

Fig. 57 Alert selection

Fig. 58 Alert menu for pressure sensor

The alert menus for each sensor consist of a part which indicates if the alarm is enabled or not

and another part which indicates the limit value for the alert; once the measurement exceeds that

limit, the meter will beep and the LED will glow.

To enable/disable the alarm for a certain sensor, use the arrow keys ▲ and ▼ to select Set limit

and then press OK. If the alarm is enabled, the icon ✓ will be displayed; if not, nothing will be

displayed.

To set the limit, select Value and press OK. Then, the digit selected for changing will be

highlighted in white (fig. 22). The default values for the alarm are 30 ºC, 80 % RH, 1000 hPa,

1000 ppm (green limit) and 2000 ppm (yellow limit).

The LED will turn off when you disable all alarms or when the parameters with a set alarm fall

below the limit value set.

Fig. 59 Set value for alarm