Manual

© PCE Instruments
37
English
After selecting Time format or Date format, the device will display highlight the value to be
modified in white. The user can change the value with the arrow keys ▲ and ▼. The possible
values for the time format are 24h and 12h and the options for the date format are dd.mm.yyyy,
dd/mm/yyyy, mm.dd.yyyy, mm/dd/yyyy, yyyy.mm.dd and yyyy/mm/dd. Once the format is
selected, the OK key must be pressed.
Note:
If 12h is selected for the Time format, the time will be displayed with am/pm.
Fig. 55 Time format change
Fig. 56 Date format change
5.4.3.3 Alerts submenu
Via this submenu, you can enable/disable and define an alarm for each measured variable. In
case the measured value for a certain variable exceeds the limit set in the alert, the device will
beep every 2 seconds for a duration of 10 seconds and a red LED will turn on.
When you enter the menu, the device will display a list of the sensors represented by their units
as well as the icon ✓ next to each sensor with an enabled alarm (fig. 22).
For enabling/disabling or setting an alarm, use the arrow keys ▲ and ▼ to select the sensor you
wish to set. Then press OK to open the specific alarm menu for the selected sensor (fig. 23).